The WISPR

   
shipboard camera
Shipboard Camera
Stealth Camera
Plainsight
Plainview PT
Constant Focus Lenses™
Pan and Tilts
J2 Pan and Tilt
J6 Pan and Tilt
J8 Pan and Tilt
WISS
WISPR
Control Systems
view all products
 
   
about us
contact information
news and events
 
   
Pan/Tilt vs.
Gimbaled Systems
 
   
MSRP Product Pricing
 
   
home page
site map
   

WISPR: Wireless Imaging System Portable Recon

The WISPR (Patent Pending) is a portable wireless imaging system that is rugged, light weight and has  completely noiseless stepper motors. The pan and tilt camera has two cameras in one camera head. The cameras are bore sighted and the user can change from one to the other with no lag time and no need to focus, (the lenses are patented infinite focus lenses).

The housing is rugged and weather resistant and contains an encrypted wireless communication system and the Jadoo hydrogen power cell technology system that will provide five days of continuous use without recharging. We have the capabilities of powering the system for up to 10 days with a slight modification. Other power options include wall power, batteries or vehicle 12v power source.

The "legs" depicted in the picture fold for transporting, and the entire unit can be covered with a "GHILLIE SUIT" type device or any other type of material to enable it to blend into the background.

Specifications:

. 2 Camera Boards (1) Wide Angle FOV lens with less than 1/2 of 1% distortion and (2) a Telephoto Lens w/ the same "no" distortion type of lens.
. Operating Temperature Range from +150° F to - 40°F
. Weight 30 lbs.
. 360° pan and tilt from 0° (straight up) to minus 10° below the 90°
. 901-D Grade "A" Shock Certified Camera and Lenses
. Camera is heated, dry nitrogen charged, RFI shielded
. Meets or exceeds NEMA 4X and IP67 Standards

 


Camera Board Specifications:

Signal Format: NTSC
Image Sensor: 1/3" Interline CCD
Effective Picture Element: 768(H) x 494(V)
Horizontal Resolution: 480 TV Line
Min. Illuminance: 0.14 Lux at F1.2
S/N Ratio: More than 48dB (AGC=OFF)
Electronic Shutter: 1/60~1/100,000
Voltage Requirement: 12v DC typical
Current Requirement: 1.80 amps typical; 2.28 amps max