J2-3016A Pan & Tilt

J2 3016A Pan and Tilt

Currently installed on the DDG-1000

The J2-3016A is designed for shipboard applications and is currently on the DDG1000 and other ships. The J2 is IP/POE capable with in-camera audio/video recording capabilities. The Lux rating for the system pictured above is 2.0 Lux W/O IR illumination and Zoom capabilities, 0.05 with IR Illumination. A 0.003Lux low light system with 50mm zoom lens is available without IR illumination.

The J2-3016A systems was mandated to be interchangeable between platforms/locations and was required to meet a very stringent set of MIL-STD’s including MIL-STD 901D Grade “A” Shock. The system is maintenance free, requiring nothing more than routine lens cleaning. We know of no other systems in the market today that are as thoroughly tested as ours.

The J2-3016A system is truly rugged, reliable and cost effective.

Physical
Size:   6.3”(W) x 9.9”(H) x 5.2”(D)
Weight:   9.3 lb
Housing Construction:   6061 T6 Aluminum, Anodized per MIL-A-8625F, Type II and Type III
Electrical Connection:   Hirose #HR30-6R-C,D38999 series III, shell size 11, 13 pin, Hirose #HR30-6R-6S, Waterproof

 
Power   34 watts max. continuous @ 24VDC

Pan/Tilt Specifications
Pan Movement:   360° continuous
Pan Speed:   0.1°/sec to 40°/sec
Tilt Movement:   +90° to -30° (15° included tilt angle)
Tilt Speed:   0.1°/sec to 40°/sec

Camera Specifications
Image Sensor:   1/4” Type Super HAD CCD
Effective Picture Elements:   768 (H) x 494(V)
Number of Effective Pixels:   Approximately 630,000 pixels
Signal Format:   NTSC
Horizontal Resolution:   480 TV Line
Lens:   26x Zoom, f=3.5mm (wide) to 91.0 mm (tele), F1.6 to F3.8
Digital Zoom:   12x (312x with optical zoom)
Angle of View (H):   42 degree (wide end) to 1.7 degree (tele end)
Min. Working Distance:   35mm (wide end) to 800mm (tele end)
Sync. System:   Internal/External (V-Lock)
Min Illumination:   2.0 lx (typical) (50 IRE)
Min. Illumination w/ internal IR LEDS:   .05lux @ F1.8, illumination distance = 30ft
S/N Ratio:   More than 50dB
Electronic Shutter:   1/1 to 1/10,000 Sec 22 steps
White Balance:   Auto
Gain:   Auto/Manual (-3 to 28dB, 2dB Steps)
AE Control:   Auto

IP Module Specifications
Video Compression:   MPEG-4 Part 2 Compliant
Picture Resolution:   Full D1 (75x480 NTSC)
CIF (352x240 in NTSC)
QCIF (160x112 in NTSC)
Bit Rate:   28K to 3M bps
Image Frame Rate:   1-30fps at full D1 resolution (NTSC)
Network LAN Port:   Ethernet (10/100 Base-T)
Network Protocol:   TCP, UDP, IP< HTTP, DHCP, PPPoE, RTP, RTSP, FTP, NFS
Software:   SDK – C / Java SDK
Video Buffer:   4 GB SD card buffer,  FAT32 file storage
Up to 4 hours of data stored in MPEG files

Environmental

The J2-3016A is designed to meet the following environmental requirements:
  • MIL-S-901D Grade “A”
    • Lightweight Table and Explosive Barge Shock
  • MIL-STD-810F
    • Method 500.4 Procedure II Low/High Pressure
    • Method 501.4 Procedure I & II High Temp
    • Method 502.4 Procedures I & II Low Temp
    • Method 503.4 Procedure I Temp Shock
    • Method 506.4 Blowing Rain
    • Method 507.4 5 48 hour cycles operating Humidity
    • Method 508.5 Fungus 28 day exposure
    • Method 509.4 Salt Fog
    • Method 510.4 Procedure II Blowing Sand
    • Method 510.4 Procedure I Blowing Dust
    • Method 511.4 Procedure I Explosive Atmosphere
    • Method 512.4 proc I 1 m
    • Method 512.4 proc I 3 m
    • Method 514.5 Procedure I cat 20b 1 hr/axis 3 axis Vibration
    • Method 516.5 Procedure I Functional Shock
    • Method 519.6 Gunfire Vibration
    • Method 520.2 Procedure I & II 10 cycles each
    • Method 521.2 Ice 25.4 mm/Freezing Rain
    • Wind Load (sustained and gusts)
    • High pressure spray/water impingement
  • MIL-STD-167 Shipboard Machinery Vibration
  • MIL-STD-740 1&2 Acoustic/Structure Borne Noise
  • MIL-STD-461 E (Electromagnetic Interference)
    • CS 101, 114, 115, 116, 120
    • RE 101, 102
    • RS 103 2MHZ – 18 GHZ, 105, RS 101
  • DoD-STD-1399
    • Section 070 Magnetic Fields
    • Section 301A Ships Motion
    • Inclination +/- 45 degrees 5-7 cpm
  • MIL-STD 1686C Electrostatic Discharge

 

See Certifications & Testing

 

Vision Technologies proudly offers 901-D “Grade A”
Shock Certified Camera Systems Read More

Featured Product

Constant Focus Lens

Constant Focus Lens

Specific day camera systems developed by Vision Technologies for military applications evolved from an adaptation of our patented Constant Focus Lens...

News & Events

MRAP delivery of Vision Technologies systems to Aberdeen Proving Grounds
Friday, April 22, 2011

Granted service disabled veteren owned small business status
Monday, May 10, 2010